About Our Hammond Metal Roof Coating Work
How We Inspect, Repair, and Coat Commercial Roofs
This is about our Hammond metal roof coating work: what we check, what we fix first, and where we draw the line on a roof.
What to Know About Our Hammond Metal Roof Coating Work
Everything about our Hammond metal roof coating work starts on the roof itself, with the owner or manager walking it alongside us when possible.
We coat commercial roofs: steel warehouses, mill support buildings, shops, offices, and church halls across Hammond and five nearby towns. Coating is the service, and the inspection is how we decide whether a roof is ready for it.
When a roof needs repairs first, we say which ones and price them with the coating. When it needs replacing, we say that too, with the reasons written on the report.
- Written findings after every inspection
- Repairs priced alongside the coating
- One recommended system per roof section
- Commercial and industrial roofs only
Want a Second Opinion on a Leaking Roof?
If another bid called for a full tear-off, we will walk the roof and tell you whether coating is a real option for it.
What Our Inspection Checks
Eight things get checked on every roof before we recommend a system or a price.
Fastener Tightness
Screws checked by hand across the field, with stripped ones marked.
Side And End Laps
Laps opened at a few points to look for sealant failure.
Rust Depth
Rust tapped and scraped to tell surface bloom from thinning steel.
Insulation Moisture
Readings taken where ceiling stains or soft spots show up.
Curbs And Penetrations
Flashing at units, fans, and pipes inspected for cracks and gaps.
Drains And Gutters
Outlets cleared and checked for the ponding they cause upstream.
Skylights
Frames, lenses, and seals checked for leaks and brittle panels.
Structure Signs
Sagging, loose purlins, or deck damage flagged for repair before coating.
Where We Draw The Line
Some roofs are ready to coat, some need repair work first, and some are past coating. These are the calls we make most often.
- Usually Fits
- Sometimes
- Rarely
| What You See On The Roof | Coat Now | Repair First | Replace Instead |
|---|---|---|---|
| Weathered paint, tight screws, dry insulation | Usually Fits | Rarely | Rarely |
| A handful of rusted-through panels | Rarely | Usually Fits | Sometimes |
| Wet insulation under a few bays | Rarely | Usually Fits | Sometimes |
| Wet insulation under most of the roof | Rarely | Rarely | Usually Fits |
| Panels pulling off sagging purlins | Rarely | Rarely | Usually Fits |
| Shingles curled, brittle, or missing | Rarely | Sometimes | Usually Fits |
Talk With Us About Our Hammond Metal Roof Coating Work
Call or request an estimate, and we will set a time to walk the roof with you.